Hardware Requirements

• Processor:
  • Minimum requirement – Pentium processor with 800 Mhz or above.
  • Production Environment – Pentium 4 processor with 1.4 Ghz or above.

• Memory (RAM)
  • Minimum Requirement - 2 GB
  • Production Environment - 4 GB

• Disk Space - Websphere Portal and Cloudscape together requires 2.4 GB. An additional 750 MB has to be available for Temp Directory.
• File System - NTFS is recommended. Ensure enough disk space is available if using FAT32 file system.
• Network Adapter: network adapter such as Ethernet ot Token ring is required.

Software Requirement

• Operating System
  • Windows™ 2000 Server with Service Pack 4 or Windows 2000 Advanced Server with Service Pack 4
  • Windows XP Professional with Service Pack 1a or Service Pack 2 (for development and test purposes only)
  • Windows 2003 Standard Edition with Service Pack 1 or Windows Server 2003 Enterprise Edition with Service Pack 1
• Database - IBM Cloudscape version 5.1(Comes along with WebSphere Application Server).
• Web Browsers
  • Internet Explorer V6.0 Service Pack 1 (Service Pack 2 for Microsoft™ Windows XP)
  • Firefox V1.5 or above
  • Mozilla V1.7
  • Netscape Communicator V8.1
  • Apple Safari 2.0 (limited support)

Note:
1. Web browser support varies portlet.

2. If WebSphere Portal is installed on IPv6, then all browsers that access it must also have IPv6.

3. Due to incompatibilities of CSS and JavaScript implementations in Netscape, there are inconsistencies when Netscape is used with Document Manager.

• Software for Portlet development
  • IBM Rational^® Application Developer Version 7.0
  • WebSphere Portal Application Integrator Development Tool 5.1
  • IBM WebSphere Portlet Factory 6.0
  • Java 2 SDK – IBM (Windows 32 - cn131w-20020710)
• Application server - WebSphere Application Server V6.0.2, WebSphere Application Server Network Deployment V6.0.2, and WebSphere Process Server V6.0.1
• Software for Collaboration(Optional)
  • IBM Lotus Domino 7.0.2
  • IBM Lotus Sametime 7.5

Step 16:The installation process will proceed and the log information can be checked by clicking the Open button.
Figure 16

Step 17:When the installation is finished, a confirmation screen will appear. Launch First Steps is enabled by default. Click onFinish.
Figure 17

Step 18: The First steps screen should appear. Click the Launch WebSphere Portal link.

Figure 18

Part 1     Part 2     Part 3         Part 4

Step 11 : In the “Install Business Process Support”, select “Do not install WebSphere Process Server”. Installing WebSphere Process Server will hinder completing the Cluster.

Figure11

Note: Some platforms do not support WebSphere Process Server and hence WebSphere Portal Installer may not prompt for its installation.

Step 12: Select the path for the installation of Websphere Portal Server. This will by default match the base path of the Websphere Application Server.

Figure 12
Note: Please shorten the default path of installation, as Windows cannot handle path names longer than 256 characters.

Step 13: Enter a username and password for the WPS admin account.
Figure 13

Step 14: Portal can be configured to run as a service, but is not desirable, as it may cause installation and other configuration tasks to fail.In the “Windows Service Definition” screen, enter the Windows Administrator User ID and Password alone.
Figure 14

Note: If the run as a service is selected, the portal server might fail to start within the default timeout period. Portal Server can later be modified to run as a service after increasing the timeout period.

Step 15:A confirmation screen with the details specified would be thrown, review the screen and click Next.
Figure 15

Part 1 Part 2 Part 3 Part 4

Step 6: Accept the terms of the license and click on Next.
Figure 6

Step 7: Choose a Typical install and click on Next.
Figure7

Note: Choose Custom installation when upgrading to a new version of WebSphere Portal on an existing WebSphere Application Server.

Step 8:In the “Installation directory” screen, choose the Directory location where WebSphere Application Server has to be installed.

Figure 8

Note: Please shorten the default path of installation, as Windows cannot handle path names longer than 256 characters.

Step 9:In the “Properties for this instance” screen, verify the cell name, node name and host name of WebSphere Application Server information.
Figure9

Note:Please do not use cell names or node names longer than 5 characters each (Failure to do so can increase the path name beyond the Windows limit of 256 characters).

Step 10:Present the admin account name and password for the WebSphere Application Server. This is needed for the installation.
Figure10

Part 1     Part 2     Part 3     Part 4

Part 1             Part 2             Part 3             Part4

Step 1: Open the WebSphere Portal Server 6.0 Installation files.
Figure 1

Step 2 : Extract the Zip files and name them as shown below.

C93LQML to W-1

C93LSML to w-2

C93LWML to w-3

C93LRML to w-4

C93LUML to w-5

and C93M4ML to w-install

Figure 2

Step 3: Open the W-Install directory and double click on Install.bat
Figure 3

Step 4:Choose the desired language and click OK.

Figure 4

Step 5: Details of WebSphere Portal Server Help is available in Information Center. Click on Launch Information Center tab to get the details online. Click on Next.
Figure 5

Part 1         Part 2         Part 3         Part4